NAME: |
HINDUSTAN CASTINGS. |
ADDRESS : |
PLOT NO. : D-19, GOKUL SHIRGAON , M.I.D.C.
DIST : KOLHAPUR-416 234
PHONE NO : (0231) 2672251.
E - MAIL :  |
YEAR OF COMMENCEMENT : |
1989. |
PLANT DETAILS: |
PLOT AREA - 8,000 SQFT.
BUILT- UP AREA - 3500 SQFT |
REGISTRATIONS: |
SSI NO. (E.M.NO.): 27 034 12 00250 |
| |
CST, VAT: 27570847075-C, 27570847075-V
|
| |
ECC NO. : ABGPM8686FEM001 |
MACHINES : |
CNC MACHINE – 2
HEAVY DUTY LATHE MACHINES – 8
LIGHT DUTY LATHE MACHINES - 2
DRILL MACHINE – 1
LIGHT DUTY DRILL MACHINES-2 |
| |
Sr No. |
|
|
|
1. |
CNC MACHINE |
LMW PILATUS - 25T |
Mentioned Below* |
2. |
CNC MACHINE |
LMW LL20TL5 |
Mentioned Below* |
3. |
Retrofit CNC |
Chroma System on Atul Lathe |
7 Feet |
4. |
HEAVY DUTY LATHE |
Atul |
7 Feet |
5. |
HEAVY DUTY LATHE |
MEGHA |
6 Feet |
6. |
HEAVY DUTY LATHE |
SAGAR |
6 Feet |
7. |
HEAVY DUTY LATHE |
SAGAR |
7 Feet |
8. |
HEAVY DUTY LATHE |
Atul |
7 Feet |
9. |
HEAVY DUTY LATHE |
Sagar |
7 Feet |
10. |
HEAVY DUTY LATHE |
Bharat |
7 Feet |
11. |
DRILLING MACHINE |
M.E.W |
1" Inch |
12. |
DRILLING MACHINE |
S. E.W |
1" Inch |
13. |
BENCH GRINDER |
Raj Laxmi |
--- |
14. |
AIR COMPRESSOR |
Crompton |
5 HP |
|
TOTAL MANPOWER |
1) TECHNICAL :- 14 NOS.
2) NON-TECHANICAL : - 01 NOS. |
FUTURE PLANS |
1) VMC MACHINE 2) TRIOMOS |
CONTACT PERSONS |
MR.KAILASH B. MAGDUM CELL.NO.9881248251 |
|
MR.HERAMB K. MAGDUM CELL NO.9881372707 |
| |
Pilatus 25T - Specifications : |
|
| |
Title |
Description |
PILATUS 25T |
Capacity |
Swing over Carriage, diameter |
340 mm ( 13.38" ) |
Recommended Chuck diameter |
250 mm ( 10" ) |
Bar capacity, diameter maximum |
51 mm ( 2" ) |
Admit between centres |
550 mm ( 21.65" ) |
Turning length*, maximum |
410 mm ( 16.14" ) |
Spindle |
Spindle nose |
A2-6 |
Spindle speed range, rpm |
35-3500 |
Constant power with Transmission Gear Box |
296-3500 |
Spindle motor power AC (30 mins.) |
11 kW ( 15 hp ) |
Feed System |
Rapid traverse rate - Z axis |
20 m/min ( 787 ipm ) |
Rapid traverse rate - X axis |
15 m/min ( 591 ipm ) |
Turret |
Number of Tool Stations |
8 |
Tool shank, standard |
25 x 25 mm ( 1 " x 1" ) |
Boring bar diameter, standard |
40 mm ( 1.57" ) |
Tailstock |
Quill diameter / stroke |
75 / 100 ( 2.95" / 3.94" ) |
Quill taper |
MT - 4 |
CNC System |
Controller |
Fanuc Oi TA |
Installation Data
( approx. )
( w/o chip conveyor ) |
Length |
2885 mm ( 113.58" ) |
Depth |
1750 mm ( 68.90" ) |
Height |
1640 mm ( 64.56" ) |
Weight |
2500 kgs. ( 5500 lb ) |
|
| |
We have machined up to Ø450.00 mm diameter on this machine using special tools. |
| |
LL20TL5 - Specifications: |
| |
| Title |
Description |
LL20TL5 |
| Capacity |
Swing Over Carriage, diameter |
340 |
| Chuck diameter
|
250 |
| Admit between centres
|
500 |
| Turning length*, maximum |
500 |
| Spindle |
Spindle Nose |
A2 - 6/td> |
| Spindle Speed Range, RPM |
3500 |
| Spindle Motor power |
11/7.5 |
| Feed System |
Rapid Traverse Rate - Z Axis |
30 |
| Rapid Traverse rate - X axis |
30 |
| Turret |
Number of Tool Stations |
8 |
| Tool Shank, Standard |
25x25 |
| Boring Bar Diameter, Standard |
40 |
| Tailstock |
Quill Diameter / stroke |
75 /100 |
| Quill taper |
100 |
| CNC System |
Controller |
Fanuc Oi mate TD |
Installation Data ( approx.)
( w/o chip conveyor ) |
Front x side |
2255 X 1925 |
| Weight |
3700 |
|
Experience : |
• Mahindra Brake Drums (Front And Rear).
{Scorpio Brake Drums.}
• LCV Hub.
• Differential Flange.
•
Tractor Bull cages.
•
Flywheels.
• Pulleys.
• Bearing Supports |
* We Also Manufacture Aluminum Die Castings And Gravity Castings. |
Quality Control Department |
| S. No. |
EQUIPMENT |
MAKE |
SIZE |
QUANTITY |
| 1. |
SURFACE PLATE |
SED |
650 x 650 |
01 |
| 2. |
HEIGHT GAUGE |
ADITYA |
0-300 MM |
01 |
| 3. |
BORE GAUGE |
MITUTOYO |
1) 35-60
2) 50-150 |
02
08 |
| 4. |
MICROMETER |
AEROSPACE |
1) 0 - 25
2) 25 - 50
3) 50 - 75
4) 100 - 125 |
01
01
01
01 |
| MITUTOYO |
1) 0 - 25
2) 25 - 50 |
01
01 |
| 5. |
PLUNGER DIAL
&
LEVER DIAL |
BAKER |
0.01 MM
0.001 MM |
03
04 |
| MITUTOYO |
0.01 MM
0.001 MM |
02
06 |
| MITUTOYO |
0.01 mm |
01 |
| 6. |
MASTER GAUGES
SNAP GAUGES |
NIPPON / UNITY |
-----
----- |
------
------ |
| 7. |
VERNIER |
AEROSPACE |
0 - 600 MM |
02 |
| MITUTOYO |
0 - 300 mm |
01 |
| 8. |
DEPTH
VERNIER |
MITUTOYO |
0 - 200 mm |
01 |
| AEROSPACE |
0 - 300 mm |
01 |
|
Quality Policy (*click on Certificate for larger view ) |
We at hindustan castings, Are commited at all levels to achieve Total customer satisfaction through Supply of best quality products and services, On time and at competitive prices. We shall achieve this Through the team effort of our commited employees, And our continual improvementAs a company dedicated to quality. |
Quality Objectives : |
TO ACHIVE 100% QUALITY RATING FROM CUSTOMER.
TO ACHIVE 100% ON TIME DELIVER.
|
| |
*We Have Worked With Lm6 Grade Material & Commercial Grade Material |
